Discussion Dish tv channels removing strategy

  • Thread starter kittu
  • Start date
  • Replies: Replies 63
  • Views: Views 12,272
I think they are planning to move south customers to ST2 first. After that North customers.
Once get additional TP from ST2 then only add more north channels and will move north customers to ST2
Can you explain this in detail? So that, it will be very useful.
 
No need to remove DD channels. Dish tv may share all channels from DD free dish because of same satilite position 93.5°E. without spending space from own transponders.
Is there any possibility of getting MHRD channels and radio channels in ST2 alignment?
 
ST2 at 88° , dd fd channels & MHRD channels at 93.5° . So not possible.
 
Presently dish tv running on 2 satilites. 93.5° and 95° , d2h from 88 ° . I think monoblock LNB can track 2 satilite s up to 4°-5° variation. Here 3 satilite s with 8° variation.
So I think it's impossible. 🤔!?
If it is possible ,they are the no1 operator with 30 transponders and highest channels.

ST2 at 88° , dd fd channels & MHRD channels at 93.5° . So not possible.
Previously dishtv also used asiasat5(100.5°E) with monoblock lnb. In that case too max deviation was 7°. So definitely it is possible.
I hope they must have considered this.
Let me explain you.
Old scenario- asiasat5 100.5°-gsat15 93.5°=7° deviation. Dishtv used monoblock lnb. How u got 8°?
Present scenario- SES8 95°-St2 88°=7°. Now also monoblock lnb can be used for similar deviation. Eventhough not needed here, monoblock lnb can also be made for greater deviation, pls google.
 
Let me explain you.
Old scenario- asiasat5 100.5°-gsat15 93.5°=7° deviation. Dishtv used monoblock lnb. How u got 8°?
Present scenario- SES8 95°-St2 88°=7°. Now also monoblock lnb can be used for similar deviation. Eventhough not needed here, monoblock lnb can also be made for greater deviation, pls google.
Then why not dish tv & d2h use monoblock lnb. If possible it's a very good idea. 30 transponder s, huge space available.
 
I
Let me explain you.
Old scenario- asiasat5 100.5°-gsat15 93.5°=7° deviation. Dishtv used monoblock lnb. How u got 8°?
Present scenario- SES8 95°-St2 88°=7°. Now also monoblock lnb can be used for similar deviation. Eventhough not needed here, monoblock lnb can also be made for greater deviation, pls google.
I have check this befor 2 years but not getting dishtv channels. getting dd fd channels. Also checked in fta mpeg4 stb. But no channels scanning in 95 degree. If u fix a monoblock lnb in tatasy dish u can get d2h and diahtv also.
 
I think they are planning to move south customers to ST2 first. After that North customers.
Once get additional TP from ST2 then only add more north channels and will move north customers to ST2
Sir....you have written in four lines. I am unable to grasp the sequence of information and their strategy/plans. That is why, I asked you to explain me clearly. Can you do for me?
 
I

I have check this befor 2 years but not getting dishtv channels. getting dd fd channels. Also checked in fta mpeg4 stb. But no channels scanning in 95 degree. If u fix a monoblock lnb in tatasy dish u can get d2h and diahtv also.
U r saying that u can track tatasky 83° & dishtv 95°in same dish by monobloc lnb. But not d2h 88° & dishtv 95°. It can happen because different monobloc capture different deviations. Pls try using old dishtv monobloc lnb on elliptical dishtv dish. U will get dish-d2h.

Pls check this.
Dish TV (95e) + DDFD-Sun HD (93.5) + D2H (88) using mono-block LNB
 
Last edited:
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock