Dish TV HD MonoBlock LNB DisEqC 1.1 (Working)

[akswap]

in Solid HDS2 6033:hd
DisEqC Swich 8x1 -1.1 Connected
Port1= AisaSat 7(OK)
Port 2= NSS6 (MonoBlock LNB) (ok)
Port 3= ABS2 (Ok)

Now Solved

 

[sskarnold]

RE: Dish TV HD MonoBlock LNB DisEqC 1.1 (Not Working)

hi, first connect powerpass splitter in monoblock lnb, then connect this splitter's two output into disq switch two lnb inputs.... then check........

 

[Hassan Syed]

RE: Dish TV HD MonoBlock LNB DisEqC 1.1 (Not Working)

Diseque should be 1.0 and in point 1 u have to attach NSS-6 & in point 2 u have to attach wire of Asiasat 5S

 

[akswap]

RE: Dish TV HD MonoBlock LNB DisEqC 1.1 (Not Working)

Diseque should be 1.0 and in point 1 u have to attach NSS-6 & in point 2 u have to attach wire of Asiasat 5S

i connected direct monoblock LNB to BOX ....still not able to receive AsiaSat 5(100.5) HD Channels

With DishTv Box Everything is ok...

 

[supertech]

RE: Dish TV HD MonoBlock LNB DisEqC 1.1 (Not Working)

MonoBlock LNB comes with built in DisEqC switch. if you want to get both satellites on normal receiver, you should select NSS Deqeqc as LNB1 and Asiasat as LNB2

 

[akswap]

Problem Solved..Post Updated with SS..