FEC and bit rate of 12711 H TP changed

[M.J.Sadiq]

FEC and bit rate of 12711 H TP changed. This might have happened few days before but I noticed only by now.


Old FEC 3/4
New FEC 2/3

Old bit rate 100.327 Mbit/s
New bit rate 89.165 Mbit/s

..

 

[Mr.Bhat]

AFAIK its not changed Yesterday...

 

[M.J.Sadiq]

AFAIK its not changed Yesterday...

So they changed today? I will try confirm by referring old scan reports..

Edit: Confirmed. Yesterday it was having old values. Right now can't post screenshot since unable to access imgur and postimg due to office VPN connection in laptop.

 

[Mr.Bhat]

Here is the SS...

 

[M.J.Sadiq]

Bhat bro.. I already posted the new detail screenshot. I mentioned about yesterday's scan report image in my post#3.

 

[Mr.Bhat]

Ok.. I think now corrected...

 

[shawl_who]

It so happens.... this tp is now easily getting locked on my fta box. :k

Earlier Solid box had difficulty in tackling high sr or may be bit rate.

 

[M.J.Sadiq]

It so happens.... this tp is now easily getting locked on my fta box. :k

Earlier Solid box had difficulty in tackling high sr or may be bit rate.

I already told you it could be because of higher bit rates. If you have D2H setup, you can try locking 11483 H 45000, 11546 H 45000, 11671 H 45000, 11546 V 45000 TPs which has more than 100 Mbit/s bit rate.

 

[Ashok L]

I already told you it could be because of higher bit rates. If you have D2H setup, you can try locking 11483 H 45000, 11546 H 45000, 11671 H 45000, 11546 V 45000 TPs which has more than 100 Mbit/s bit rate.

What's the use of changing FEC I mean from high to low

 

[M.J.Sadiq]

What's the use of changing FEC I mean from high to low

I think for stability.. But not sure..