give solution for getting signal..

[Carthick]

Today i buy mono block orginal dishtv lnb. remove my old normal lnb and connect mono block lnb but i getting signal from 1 tp in 12522v40700 strength 51 quality 62 in asiasat. other transponder in asiasat are strength 50 quality 2 why? and all nss6 and dd+ transponders are getting above 60% plz help. i am using sd stb zenega 1004is and normal dish. i am getting sd channels on asiasat 12522 v 40700 tp only. other hd channels names are not coming in my stb.

 

[dishtvk]

zenega 1004is is mpeg2 dvbs receiver. all other 3 TP are dvbs2 mpeg4. only get scan by dishtru hd, or dvbs2 mpeg 4 stb.

 

[Carthick]

thanks u for ur explanation. no one get signals in other transponders on sd stb?

 

[jenius-jatt]

thanks u for ur explanation. no one get signals in other transponders on sd stb?

Yes friend no one can get HD signal in SD box, So Zenega can only show you the Upper line of signal with some variations ,But as Tuner is not HD so no quality ok.

 

[Hoshang Govil]

Earlier when my signal quality was 83 and signal strength was 75 I used to get all transponder signal, after opening lnb and reinstalling it by covering it with polythene to protect from rain water, and after adjusting I got signal quality 84 and strength 76 but not getting signal of transponder number 13, 14, 15. What to do plz suggest.

 

[Vikram]

move the LNB On Right Side ....Slightly
Current Postion Of the lnb on ses7 please check this Thread

Airtel Digital Tv Ses7 Setup (Realigment) with images