Sai Jai
Contributor
- Joined
- 5 Jan 2015
- Messages
- 23,584
- Reaction score
- 32,132
Pairing Remote
Functions Can be Pair from ur Television Controls
Power button
Mute button
AV button
Volume +/- button
Steps for Pairing
-> Bring adtv remote in pairing mode. Press and hold the OK and Number 2 key for 3 seconds of ur adtv remote. The LED blinks twice to indicate that your adtv remote is ready to pair
-> Hold the Television remote and Adtv remote in front of each other closely
-> First press the television remote then adtv remote for what are all the functions you want pair
Ex) volume means 1st press the tv remote + button then adtv remote + button .. then tv remote - button then adtv remote - button like that foer AV control , mute , tv power control
-> Press OK button on Adtv remote to store the control procedure about your Tv .. Then LED will blink 2 to indicate the successful pairing to controls from your current Tv remote to ur adtv remote .. if the Adtv remote LED blinks 4 times means the pairing failed.
Steps to unpair the ur universal adtv remote:
Once the ur adtv universal remote is paired state .. then if you want to unpair means ..
Press & hold Red and Ok button in ur adtv remote for 3 secs. and then press quickly & simultanously button 9 , button 8 , button 0 and then press Ok button in adtv remote ..
Now ur adtv universal remote is unpaired successfully ..
Functions Can be Pair from ur Television Controls
Power button
Mute button
AV button
Volume +/- button
Steps for Pairing
-> Bring adtv remote in pairing mode. Press and hold the OK and Number 2 key for 3 seconds of ur adtv remote. The LED blinks twice to indicate that your adtv remote is ready to pair
-> Hold the Television remote and Adtv remote in front of each other closely
-> First press the television remote then adtv remote for what are all the functions you want pair
Ex) volume means 1st press the tv remote + button then adtv remote + button .. then tv remote - button then adtv remote - button like that foer AV control , mute , tv power control
-> Press OK button on Adtv remote to store the control procedure about your Tv .. Then LED will blink 2 to indicate the successful pairing to controls from your current Tv remote to ur adtv remote .. if the Adtv remote LED blinks 4 times means the pairing failed.
Steps to unpair the ur universal adtv remote:
Once the ur adtv universal remote is paired state .. then if you want to unpair means ..
Press & hold Red and Ok button in ur adtv remote for 3 secs. and then press quickly & simultanously button 9 , button 8 , button 0 and then press Ok button in adtv remote ..
Now ur adtv universal remote is unpaired successfully ..