Questions about transponders.

[mussu-100]

Id like it if some expert would help me out a bit. Im not very good at sat's and all.

First of all, how much signal strength and signal quality is needed to play the channels smoothly? What is the minimum amount of signal quality and strength required, and what is the recommended amount?

Secondly, which channels are on NSS 6 transponder 10990 V 27500 ?
Im wondering about this because the signal levels are low on this transponder especially. This one has:
Signal Strength: 54-58
Signal Quality: 64-68

Is this enough to play the channels smoothly or should I adjust my dish?

All the other TP's from NSS 6 are around:
Signal Strength: 68-75
Signal Quality: 75-85

And from Asiasat 5 its mostly:
Signal Strength: 67-70
Signal Quality: 75-77

Are these enough?

And lastly id like to ask if signal strength and quality make a difference in the picture QUALITY? Im not asking about the freezing of the picture, just the quality?

Id really appreciated if someone could answer my questions

 

[Vadirocks]

1. It's Depends On Fec Of That Particular Tp. Probabily In All DTH In Average 40 To 50 Signal Is Enough To Play

2. Let Me Check Tomorrow Because Today I'm Out Home

3. Currently I'm Also Having Same Signal In My HD Connection And I Have No Problem

4. I Don't Think Signal Level Will Make Difference In Picture Quality Except Freezing

 

[hingorjo]

bro these tp,s
10990 V27500
11070 V 27500
11150 V 27500
11490 V 27500
11570 V 27500
are from INSAT4B 93.5 E (DD DIRECT + ) SATELLITE
U r receiveing 50 to 60 % signals on these tp,s those signals are fine for dd direct channels .....

 

[mussu-100]

bro these tp,s
10990 V27500
11070 V 27500
11150 V 27500
11490 V 27500
11570 V 27500
are from INSAT4B 93.5 E (DD DIRECT + ) SATELLITE
U r receiveing 50 to 60 % signals on these tp,s those signals are fine for dd direct channels .....

Then i guess thats ok