Step by step procedure to recover Solid hds2 STB

While upgrading HDS2 6069 SETUP BOX it fails , now setup box is not working
Please send me the universal loader file to connect USB to 6069 Setup box having mini RS-232 connector
Same here .if u success then please share the process.
 
Sir ji muze melbon painapple hdmpeg4 ka fremwear file chahiye plz help SW/S-HN-4907 model no hai
 
bro my melbon hd stb also dead if the same procedure to recover
if possible
 
Respected sir , ineed loader software to recover dead solid 2100 pro, how I can receive this software plz tell me
 
Last edited:
Problem Introduction: I done wrong firmware update on my solid hds2 STB which leads to boot fail and my STB is totally bricked. it also may happens during
-wrong firmware upgrade
-power failure during upgrade
-incomplete dump process...
dsc03435_wtm_wtm.jpg

Tools you need to recover
1. DB9 null RS232 cable having three wires

dsc03451_wtm.jpg


- Three Pin configuration (though there are four wires inside your STB)
pin2-pin3
pin3-pin2
pin5-pin5
2. Universal Loader to upgrade your bricked STB
3. Software file either in .bin or .abs format or all chunk files
4. Power backup
5. And of course your bricked STB

Step by Step process
1. Connect your STB to serial port of computer using DB9 null RS232 cable and confirm it is in OFF sate
2. Start universal loader, hit connect, and simultaneously turn ON STB

loader-main_1_wtm.jpg


3. Following screen will come, Double click on all chunk, and select appropriate software

chunk-selection_2.jpg


4. Now process will start and stb starts upgrading

process_3.jpg


5. This window gives you great relief :c:c:c

success_4_wtm.jpg


6. I have this software to extract all chunk files

chunk-extraction_6.jpg



for loader software PM me
Note: Do it on your own risk
 
Problem Introduction: I done wrong firmware update on my solid hds2 STB which leads to boot fail and my STB is totally bricked. it also may happens during
-wrong firmware upgrade
-power failure during upgrade
-incomplete dump process...
dsc03435_wtm_wtm.jpg

Tools you need to recover
1. DB9 null RS232 cable having three wires

dsc03451_wtm.jpg


- Three Pin configuration (though there are four wires inside your STB)
pin2-pin3
pin3-pin2
pin5-pin5
2. Universal Loader to upgrade your bricked STB
3. Software file either in .bin or .abs format or all chunk files
4. Power backup
5. And of course your bricked STB

Step by Step process
1. Connect your STB to serial port of computer using DB9 null RS232 cable and confirm it is in OFF sate
2. Start universal loader, hit connect, and simultaneously turn ON STB

loader-main_1_wtm.jpg


3. Following screen will come, Double click on all chunk, and select appropriate software

chunk-selection_2.jpg


4. Now process will start and stb starts upgrading

process_3.jpg


5. This window gives you great relief :c:c:c

success_4_wtm.jpg


6. I have this software to extract all chunk files

chunk-extraction_6.jpg



for loader software PM me
Note: Do it on your own risk

HELLO SIR..

FOR DB9, NUMBERING FOR PIN IS DIFFERENT FROM MALE PIN &FEMALE PIN ? FROM WHICH SIDE TO START COUNT 1 TO 6 (LEFT TO RIGHT OR RIGHT TO LEFT) ? CAN YOU EXPLAIN ABT THIS ? FOR SOLID 6141 WHICH LOADER IS WORKING ? REPLY PLZ
 
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock