Step by step procedure to recover Solid hds2 STB

Er. Dhananjay

Member
Joined
4 May 2012
Messages
321
Reaction score
92
Problem Introduction: I done wrong firmware update on my solid hds2 STB which leads to boot fail and my STB is totally bricked. it also may happens during
-wrong firmware upgrade
-power failure during upgrade
-incomplete dump process...
dsc03435_wtm_wtm.jpg

Tools you need to recover
1. DB9 null RS232 cable having three wires

dsc03451_wtm.jpg


- Three Pin configuration (though there are four wires inside your STB)
pin2-pin3
pin3-pin2
pin5-pin5
2. Universal Loader to upgrade your bricked STB
3. Software file either in .bin or .abs format or all chunk files
4. Power backup
5. And of course your bricked STB

Step by Step process
1. Connect your STB to serial port of computer using DB9 null RS232 cable and confirm it is in OFF sate
2. Start universal loader, hit connect, and simultaneously turn ON STB

loader-main_1_wtm.jpg


3. Following screen will come, Double click on all chunk, and select appropriate software

chunk-selection_2.jpg


4. Now process will start and stb starts upgrading

process_3.jpg


5. This window gives you great relief :c:c:c

success_4_wtm.jpg


6. I have this software to extract all chunk files

chunk-extraction_6.jpg



for loader software PM me
Note: Do it on your own risk
 
Er. Dhananjay said:
Problem Introduction: I done wrong firmware update on my solid hds2 STB which leads to boot fail and my STB is totally bricked. it also may happens during
-wrong firmware upgrade
-power failure during upgrade
-incomplete dump process...
dsc03435_wtm_wtm.jpg

Tools you need to recover
1. DB9 null RS232 cable having three wires

dsc03451_wtm.jpg


- Three Pin configuration (though there are four wires inside your STB)
pin2-pin3
pin3-pin2
pin5-pin5
2. Universal Loader to upgrade your bricked STB
3. Software file either in .bin or .abs format or all chunk files
4. Power backup
5. And of course your bricked STB

Step by Step process
1. Connect your STB to serial port of computer using DB9 null RS232 cable and confirm it is in OFF sate
2. Start universal loader, hit connect, and simultaneously turn ON STB

loader-main_1_wtm.jpg


3. Following screen will come, Double click on all chunk, and select appropriate software

chunk-selection_2.jpg


4. Now process will start and stb starts upgrading

process_3.jpg


5. This window gives you great relief :c:c:c

success_4_wtm.jpg


6. I have this software to extract all chunk files

chunk-extraction_6.jpg



for loader software PM me
Note: Do it on your own risk


Dear Brother,

Can you please tell me which part of the pin numbers to be connected i.e., pin-2, pin-3, pin-5 (to computer or Set-top-Box), pin -3, pin-2, pin-5(to computer or Set-top-Box)
 
srajeshvilla said:
Dear Brother,

Can you please tell me which part of the pin numbers to be connected i.e., pin-2, pin-3, pin-5 (to computer or Set-top-Box), pin -3, pin-2, pin-5(to computer or Set-top-Box)

Also give me the exact solid HDS2-3000 SOFTWARE and loader software which you've upgraded. My number is 9884066493. Thanks in Advance.
 
srajeshvilla said:
Dear Brother,

Can you please tell me which part of the pin numbers to be connected i.e., pin-2, pin-3, pin-5 (to computer or Set-top-Box), pin -3, pin-2, pin-5(to computer or Set-top-Box)

connecting order is vice-versa
pin2-pin3
pin3-pin2
pin5-pin5

you can use either
 
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock