Seeking Help Videocon d2h hang on logo stuck DDBTVV3212A

Nagi Reddy

Member
Joined
3 Jan 2019
Messages
248
Reaction score
429
Videocon d2h hang on logo stuck DDBTVV3212A
Can you solve the problem
 
gkJ27Xl.jpg
 
I had same problem with 3333 rf stb, called customer care, they said hw failure and replaced stb
 
Step 1: Switch off the main power supply and switch on again.
Step 2: Once d2h logo appears press the following keys one by one on your remote.
Press Green button, zero button , five button and mute button.
Note :::: Don't press all the buttons simultaneously.... You should press one by one ( press one button then release it then press next) ....

Press these buttons and wait for few minutes ( 2 to 5 mins)...
If not working try few times , it will work...
Now the settop box will reboot and will scan the channels....
 
Step 1: Switch off the main power supply and switch on again.
Step 2: Once d2h logo appears press the following keys one by one on your remote.
Press Green button, zero button , five button and mute button.
Note :::: Don't press all the buttons simultaneously.... You should press one by one ( press one button then release it then press next) ....

Press these buttons and wait for few minutes ( 2 to 5 mins)...
If not working try few times , it will work...
Now the settop box will reboot and will scan the channels....
This method won't work on RF remote support boxes and DDB also
 
This method not working ddb
Try this one...
1.
Switch off the main power supply....
2. Press and hold the reset button which is present at the back side of stb.
3 . Switch on the power supply.
4. Now after the logo appears, leave the button....
 
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock