Installation Steps to get the firmware installed manually via USB.
· Download the file “06.02.69_full.zip” from above ftp and unzip it
· Format the USB device in FAT32 format
· Copy the “airtel_g1_update” file in the USB
· Power OFF the STB
· Insert USB disk in the USB port of STB
· Press and hold the standby button at the front panel
· Power ON the STB
· Release the standby button when all three front panel keys start glowing amber
· Wait for installation to get complete
· Remove the USB
For registering the new firmware:
• Connect the box to internet (mobile hotspot / wifi) & go to settings and ‘Check updates’. Ensure this happens as this will refresh the latest firmware on the box to the NOC.
· Download the file “06.02.69_full.zip” from above ftp and unzip it
· Format the USB device in FAT32 format
· Copy the “airtel_g1_update” file in the USB
· Power OFF the STB
· Insert USB disk in the USB port of STB
· Press and hold the standby button at the front panel
· Power ON the STB
· Release the standby button when all three front panel keys start glowing amber
· Wait for installation to get complete
· Remove the USB
For registering the new firmware:
• Connect the box to internet (mobile hotspot / wifi) & go to settings and ‘Check updates’. Ensure this happens as this will refresh the latest firmware on the box to the NOC.