Tips for using Satellite finder

  • Thread starter Vinay
  • Start date
  • Replies: Replies 30
  • Views: Views 57,880
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझा

Max said:
Bhohot Achchhe.

Ye point clear kar dijie please.

Dhanyawad!

Ek 100 Ohms ke Resistor ko LNB aur Satellite Finder se Series mein join karna hai.
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझा

Vinay said:
Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव
१. हमेशा सही कनेक्टर देखकर जोड़ें, कभी उल्टा ना जोड़ें |

२. सैटेलाइट फाईन्डर को डिश के सीधे सामने ना रखिये, ऐसे हमेशा गलत फुल स्केल रीडिंग मिलेगा, उसे डिश के नीचे या थोडा दूर रखें |

४. अगर एल.एन.बी का सिग्नल गेन ७० dB से ज्यादा हो तो १०० Ohms के resistor को भी जोड़ें |
५. डिश को जल्दी में ना घुमाएँ, धीरे से घुमाकर कुछ क्षण रुकें सही रीडिंग के आने तक |[/size]

Kya baat hai bhai using Hindi. I am proud of you. Continue continue.
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझा

Very nicely written. Thanks for valuable information.

dreamdth
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

Vinay said:
Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

1. Connect the "To LNB" and "To STB" connector correctly as written on the Satellite Finder. Never connect in reverse.
१. हमेशा सही कनेक्टर देखकर जोड़ें, कभी उल्टा ना जोड़ें |

Xnnn7.jpg


2. Do not hold or keep the Satellite Finder directly in front of the dish or near the LNB to prevent wrong full-scale reading always due to noise. Its better to keep it below the dish or little away from it.
२. सैटेलाइट फाईन्डर को डिश के सीधे सामने ना रखिये, ऐसे हमेशा गलत फुल स्केल रीडिंग मिलेगा, उसे डिश के नीचे या थोडा दूर रखें |

a5RZT.jpg


3. If there is a full-scale deflection, reduce the reading by turning knob accordingly and again check for peak signals.
३. सैटेलाइट फाईन्डर की सुई फुल स्केल होते ही रीडिंग कम करें बटन घुमाकर और फिर से जाँचें |

4. If the LNB Output Signal gain is more than 70dB, connect a 100 Ohms resistor to act as an Attenuator.
४. अगर एल.एन.बी का सिग्नल गेन ७० dB से ज्यादा हो तो १०० Ohms के resistor को भी जोड़ें |
UIroY.jpg


5. Do not move the dish quickly, move slowly and wait for a few seconds to get the correct indication.
५. डिश को जल्दी में ना घुमाएँ, धीरे से घुमाकर कुछ क्षण रुकें सही रीडिंग के आने तक |

good work
keep it up
:k:hello:clap:clap:clap:clap
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

Thnkes you
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

i like hindi translation......it helps me as i dont knw much english
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

ये KU band पर तो आसानी से काम कर रहा है पर C band पर काम नहीं कर रहा है क्या करू C band को ढूंढने के लिए
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

If any using or having FIRST STRIKE or TRACKER LIGHT satellite finders please reply............
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

nice bro in hindi languages
 
RE: Tips for using Satellite finder / सैटेलाइट फाईन्डर उपयोग के सुझाव

Hi में नया साटे लाइट फाइंडर लेना चाहता हू कोनसा लू ?
 
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock