Seeking Help Good quality signal but no channel is scanning by Set Top Box

[anetsjosep]

Hai , i installed a 6 feet dish, Solid 6363 set top box, 60db LNB, and tracked Intelsat 17, and give a blind scan , i got some channels. But when I try to catch TP 4006 i got 78% signal quality but when scanning there is no channel. what is the problem? Similarly when I try to catch some particular TP I will get good signal quality but again no channel.

 

[knd1983]

Have you set the lnb skew correctly?
Does your stb show BER of a tp?

Signal might be good, bad BER rate due to wrongly rotated lnb can cause this.

Example, on apstar I found the FTV to be very sensitive to skew. A little small rotation and channel freeze.

Secondly, 6ft may not be sufficient for that satellite. I have this case for my location.

75% of lower side of India has best IS17 signal and still that needs 240cm min dish for real good signal. 6ft is luck.

Regards,
Kiran