I Catch 3 Satellites in one Modified KU-LNB

  • Thread starter Thread starter jenius-jatt
  • Start date Start date
  • Replies Replies: Replies 14
  • Views Views: Views 5,289

jenius-jatt

Member
Joined
6 Aug 2011
Messages
6,406
Reaction score
6,674
I Catch 3 Satellites in one Modified KU-LNB

Friends I catch three satellites : Insat-4CR @ 74*East + ABS-1 @ 75*East + Apstar-7 @ 76.5*East (China beam) ,It was possible with help of my friend Vijay from south (Tamilnadu) as he send me the modified lnb scaler .I am very grateful to him as he helped to make this possible.To some extent it increses signal approx: 5% to 7% according to the location and situation. So here find some Screen shots of the setup and signal of all three satellites .

One thing I tell you it is very Hard work and not so easy to get 3 satellites in one single lnb and dish,The two satellites ABS-1 at 75*East & Insat-4CR at 74*East also help me because of good signal in my area .So kindly take this also in mind that the signal varies from one location to another thanks.

HERE IS DISH SETUP OF 3 SAT:-

3satinoneLNB3_zpsfab31f87.jpg


THE LOWER PART OF SCALER-RING:-

kuscaler1_zps8e0d40f7.jpg


HERE IS SIGNAL SS OF 3 SATELLITES:-

INSAT-4CR @ 74*EAST:
74eastfeed_zpsd91b3dbe.jpg


ABS-1 @ 75*EAST:
75Abs1_zpsc5ac8348.jpg


APSTAR-7 @ 76.5*EAST (China beam):
76eastsignal2_zps614bca9d.jpg


Note:- One thing I tell you the signal of Apstar-7 @ 76.5*East (China Beam) I get is approx: 35% to 40 % and it was varying not stable so I didn't get channels locked from this TP as signal was very low But it was a great Experience, So rest ABS-1 & Insat4CR are ok as I receive some of the channel, I will also try some other weak signal satellites and when get any achievement then post in the forum.Thanks:)
 
shawl_who said:
Wow.. Gud work done bro. I know catching sats. 2.5 degrees apart in a single lnb is not an easy task. So, kudos to u and ur frnd. :clap
Yes shawl bro it is very difficult and took two hours to align the setup and adjustments, But last I succeeded :)
 
SoftHand_Tech said:
good job bro

is any new channel available
Thanks and only one new channel in ABS-1 started that is already posted dear, Channel name AUTO-24 freq:12640 V 22000
 
That's a chapparal style feed. It reduces edge currents thereby sidelobes. Very nice work.
 
srinivas33 said:
That's a chapparal style feed. It reduces edge currents thereby sidelobes. Very nice work.
Thanks and I didn't get you friend can you explain ;)
 
Back
Top Bottom