[pics.]My Field Strength Meter (DB Meter / RF Level Meter)

  • Thread starter Thread starter Anil.HD
  • Start date Start date
  • Replies Replies: Replies 2
  • Views Views: Views 7,778

Anil.HD

Member
Joined
27 Jun 2011
Messages
1,296
Reaction score
432
FDmhU.jpg

f9j1q.jpg


Sharp Vision Field Strength Meter AS 940 is Fully Digital, thereby displays Signal Strength Frequency, Channel number and V/A in Digital Display. It's Memory of 106 Channels at 10 Locations makes it a Topper. It is calibrated on Agilent (HP) Spectrum Analyzer for Accuracy.
Frequency of Operation : 46 ~ 860 MHz (106 channels)
Auto Frequency Tuning (AFT) : AS 950 automatically tunes to the frequency of your modulator, even if it is slightly drifted - an essential feature to get the correct level.
Direct V/A Measurement : On just pressing V/A key-you get aural difference & speaker gives audio for the selected Channel.
Direct Slope Measurement : You can directly measure the Slope of your Cable System by the press of SLOPE key. The slope measurement can be between any 3 Channels of your choice.
3 Channels Measurement : Get level of any 3 Channels of your choice on a single screen.
Favourite Channels : For quick study of your cable system.
Memory of 106 Ch at 10 Locations : Your Technician can store the signal level of all 106 Channels & PP voltage from 10 different locations in your AS 950.
Reverse Path Channels : Use sub - Converter AS 951 to measure reverse path channels.
Continuous Power Pass (PP) Reading
Accuracy : ± 1.5dB
Resolution : 0.2dB
 
Watermark pictures updated.


dreamdth
 
Very nice post, with images... @Anil...
Can u explain Slope of cable system, and function of slope key in the instrument?? :huh
 
Back
Top Bottom