Feku
Member
- Joined
- 5 Nov 2015
- Messages
- 190
- Reaction score
- 121
Friends
My setup ...
1. Diseqc 2.x supported DVB-S2 USB tuner (TBS)
2. Diseqc 2.0 4x1 switch (Solid)
3. DVB Dream software
4. Single 100cm dish with 2 Ku band LNBS attched (75E & 88E)
5. I have used Diseqc switch's port-1 for 75E and port-2 for 88E
I have no problem watching 75E channels (attached to port-1 of switch).
But when I scan 88E (attached to port-2), though the receiver finds the signal and locks the signal, but shows no channels found :wall Where as if attach 88E to port-1 it scans and shows the channels properly.
Now I'm clueless how to use the diseqc switch? Please help me. If you need any further info to solve this issue, please let me know.
My setup ...
1. Diseqc 2.x supported DVB-S2 USB tuner (TBS)
2. Diseqc 2.0 4x1 switch (Solid)
3. DVB Dream software
4. Single 100cm dish with 2 Ku band LNBS attched (75E & 88E)
5. I have used Diseqc switch's port-1 for 75E and port-2 for 88E
I have no problem watching 75E channels (attached to port-1 of switch).
But when I scan 88E (attached to port-2), though the receiver finds the signal and locks the signal, but shows no channels found :wall Where as if attach 88E to port-1 it scans and shows the channels properly.
Now I'm clueless how to use the diseqc switch? Please help me. If you need any further info to solve this issue, please let me know.