My setup ...
1. Diseqc 2.0 supported
DVB-S2 USB tuner (TBS)
2. Diseqc 2.0 4x1 switch (Solid)
3. DVB Dream software
4. Single 100cm dish with 2 Ku band LNBS attched (75E & 88E)
5. I have used Diseqc switch's port-1 for 75E and port-2 for 95E dd
I have no problem watching 75E channels (attached to port-1 of switch).
But when I scan 95E dd (attached to port-2), though the receiver finds the signal and locks the signal, but shows no channels found :wall Where as if attach 88E to port-1 it scans and shows the channels properly.
Now I'm clueless how to use the diseqc switch? Please help me. If you need any further info to solve this issue, please let me know.
1. Diseqc 2.0 supported
DVB-S2 USB tuner (TBS)
2. Diseqc 2.0 4x1 switch (Solid)
3. DVB Dream software
4. Single 100cm dish with 2 Ku band LNBS attched (75E & 88E)
5. I have used Diseqc switch's port-1 for 75E and port-2 for 95E dd
I have no problem watching 75E channels (attached to port-1 of switch).
But when I scan 95E dd (attached to port-2), though the receiver finds the signal and locks the signal, but shows no channels found :wall Where as if attach 88E to port-1 it scans and shows the channels properly.
Now I'm clueless how to use the diseqc switch? Please help me. If you need any further info to solve this issue, please let me know.