disqec switch

[SANDEEP PATEL]

I have solid 4 in 1 disqec switch and solid 9048 stb. But i cannot connect 2 lnb. Anybody tell me how can i do it. Is do any changes of stb setting.

 

[freedishlover]

I have solid 4 in 1 disqec switch and solid 9048 stb. But i cannot connect 2 lnb. Anybody tell me how can i do it. Is do any changes of stb setting.

Hey bro
Press Menu Button Scroll Down to installation Go to Satellite List. There you can Add or use any Satellite from the list. Press Exit button if asked save it.

Now scroll down to antenna setup there you will see 2 satellites names which you had selected earlier. Select first Satellite there you see scroll menu

Use LNB frequency as (9750-10600)
DieseQC1.0 Port1

For Second Satellite Similar process will be followed
Use LNB frequency as (9750-10600)
DieseQC1.0 Port2

Don't forget to connect cables to same ports in DiSeQC switch.

Good Luck.

 

[SANDEEP PATEL]

Ok...

 

[ajay12]

I have the same .and worked wellwith above method.

 

[mahin105]

how can i connect 10 or more sat with this switch... my stb also support diseqc 1.1

 

[shawl_who]

buy one 8x1 disecq, and one 4x1 disecq.

connect the o/p terminal of 4x1 disecq, into input of any one of d 8 ports of 8x1 disecq, then take the o/p of 8x1 disecq into ur STB :k

U ll be able to watch 7+4=11 sats like this method. :k

 

[Sricharan Panda]

buy one 8x1 disecq, and one 4x1 disecq.

connect the o/p terminal of 4x1 disecq, into input of any one of d 8 ports of 8x1 disecq, then take the o/p of 8x1 disecq into ur STB :k

U ll be able to watch 7+4=11 sats like this method. :k

Pl.explain how it will switch among 11 lnb as the receiver has the option for four. For example, if you connect the output of DISECQ 1x4 to say op terminal 5 of DISECQ, no power will be at output 5, because the receiver can only feed op 1,2,3,&4 of 1x8 switch