Help Me To Set Up My 4 in 1 DisEqC Switch

[Vadirocks]

Friends,


Please Help Me To Set Up My 4 in 1 DisEqC Switch

I Have Connected SES 7 In LNB1 & Connected ST-2 In LNB2

But I'm Getting Channels From SES 7 Only & ST-2 Channels Shows No Signal

How Do I Enable Them I'm Using Solid HDS2-3000 FTA STB

 

[Vadirocks]

I Have Tried Connecting ST-2 Alone In LNB2 But Still No Signal

 

[Vadirocks]

Whatever I Connect In LNB 1 Only Works, All Other 3 Ports Not Working (Is There Anything Do I Need To Do In STB?)

 

[mehra]

Dear, check if ur Diseqc is sourced from some reliable seller.

 

[vishalbal]

Dear Vadirocks Brother Please check images below..... Yes you have to do some setting in STB also under

1. Antenna setup
2. Discqc 1.0
3. Port number 1 or 2 or 3 or 4.

For Example i am using on discqc 1 port Videocon ku band wire then i have to select from here port 1 and on port 2 i connect asiasat 5 c band dish and for i selected port 2 in antenna setup...


.

.

.

If again having signal problem then check your discqc.

Thanx

 

[rmg_hrr]

Vadirocks, do not take output from D2H stb but directly connect the 2 wires from Dish to DiseqC and check if it works or not and before making any connect/disconnect switch off you Box power.