how to fix 9 th Lnb in 8x1 diseqc switch

[kepeeismail]

[attachment=2016][attachment=2017][attachment=2016]This is my dish set up

 

[kepeeismail]

In my dish set up at centre 83 east,right side 93.5 c band,then 100.5 asiasat,left side 78.5 thaicom, and 68.5 panamsat.
2nd dish asiasat 105.5 main and 115 chinasat.but from 105.5 vertical signal not getting through my hd box while connecting to mpeg2 and 4 box all o.k.in my coship mpeg2 box 50% signal strength for vertical cannels from 105.5.so it should be 70% in my hd box.hd box also mpeg4,sd and sbv2. from all other sat vertical channels o.k.what is the problem?

 

[rajendrakumar1977]

hello kepeeismail
At the time of auto search using dual polarity LNB all STB searches for horizontal polarity signal fist then vertical polarity signal if you already feed manually all transponder check the polarity sign first whether you put horizontal in the place of vertical and vice verse then your STB will not show any signal .

 

[jenius-jatt]

Hello friend kepeeismail good setup & nice images ,pl tell how much signal you get of Asiasat3S, Asiasat5 at 100.5E and Intelsat-20 at 68*E as a side lnb ?

 

[kepeeismail]

For my side lnb 68.5 is 40-50%.asiasat 100.5 60-72%.105. 5 about 60%.78.5 a bout 40-50%93.5 c band dd channels 30%.afganistan channel 65%

 

[kepeeismail]

Hai,
i connected 4 lnbs to 4x1 switch and out of this switch to first port of 8x1 switch.but no signal .so how will get signal for 9th lnb in 8x1 diseqc?

 

[kepeeismail]

I checked the polarity.all are correct.no problem.only signal not getting.