Side LNBFs fitting Visual Guide

  • Thread starter Thread starter Biswajit.HD
  • Start date Start date
  • Replies Replies: Replies 5
  • Views Views: Views 2,681

Biswajit.HD

Contributor
Joined
5 Aug 2011
Messages
37,813
Reaction score
4,633
Most of us are proficient in fixing side LNBFs for our dishes. However to make things easier for budding dish enthusiasts, here is a visual representation of the satellite beams falling on the dish reflector and converging at the LNBF feed-horn mouth.

The LNBFs are to be fitted on the opposite direction of the satellite beam as the beam gets reflected from the dish surface in opposite direction. Also the look angle will be higher for LNB if the Elevation angle is lower for that beam and vice-versa.

*The beam widths are shown narrower than actual to avoid confusion

403887_217878264963965_100002253792345_488490_75296948_n.jpg
 
biswajit.HD said:
Most of us are proficient in fixing side LNBFs for our dishes. However to make things easier for budding dish enthusiasts, here is a visual representation of the satellite beams falling on the dish reflector and converging at the LNBF feed-horn mouth.

The LNBFs are to be fitted on the opposite direction of the satellite beam as the beam gets reflected from the dish surface in opposite direction. Also the look angle will be higher for LNB if the Elevation angle is lower for that beam and vice-versa.

*The beam widths are shown narrower than actual to avoid confusion

403887_217878264963965_100002253792345_488490_75296948_n.jpg
what cost this dish .....fiber ya matle plz tell
 
Its is a iron metal dish spray painted.... Price range is Rs1500 to Rs2000 and LNBF cost is Rs350 to Rs400..
 
Back
Top Bottom