Step by step procedure to recover Solid hds2 STB

[Er. Dhananjay]

Problem Introduction: I done wrong firmware update on my solid hds2 STB which leads to boot fail and my STB is totally bricked. it also may happens during
-wrong firmware upgrade
-power failure during upgrade
-incomplete dump process...

Tools you need to recover
1. DB9 null RS232 cable having three wires

- Three Pin configuration (though there are four wires inside your STB)
pin2-pin3
pin3-pin2
pin5-pin5
2. Universal Loader to upgrade your bricked STB
3. Software file either in .bin or .abs format or all chunk files
4. Power backup
5. And of course your bricked STB

Step by Step process
1. Connect your STB to serial port of computer using DB9 null RS232 cable and confirm it is in OFF sate
2. Start universal loader, hit connect, and simultaneously turn ON STB

3. Following screen will come, Double click on all chunk, and select appropriate software

4. Now process will start and stb starts upgrading

5. This window gives you great relief :c:c:c

6. I have this software to extract all chunk files

for loader software PM me
Note: Do it on your own risk

 

[Johny]

Nice explanation Dhananjay.

 

[Er. Dhananjay]

thank you alpha

 

[murali_therun]

Super sir

 

[murali_therun]

is it possible to recover Solid 2100hds2 (adpter) model

 

[Er. Dhananjay]

GIVE A TRY DOST

 

[srajeshvilla]

Problem Introduction: I done wrong firmware update on my solid hds2 STB which leads to boot fail and my STB is totally bricked. it also may happens during
-wrong firmware upgrade
-power failure during upgrade
-incomplete dump process...

Tools you need to recover
1. DB9 null RS232 cable having three wires

- Three Pin configuration (though there are four wires inside your STB)
pin2-pin3
pin3-pin2
pin5-pin5
2. Universal Loader to upgrade your bricked STB
3. Software file either in .bin or .abs format or all chunk files
4. Power backup
5. And of course your bricked STB

Step by Step process
1. Connect your STB to serial port of computer using DB9 null RS232 cable and confirm it is in OFF sate
2. Start universal loader, hit connect, and simultaneously turn ON STB

3. Following screen will come, Double click on all chunk, and select appropriate software

4. Now process will start and stb starts upgrading

5. This window gives you great relief :c:c:c

6. I have this software to extract all chunk files

for loader software PM me
Note: Do it on your own risk

Dear Brother,

Can you please tell me which part of the pin numbers to be connected i.e., pin-2, pin-3, pin-5 (to computer or Set-top-Box), pin -3, pin-2, pin-5(to computer or Set-top-Box)

 

[srajeshvilla]

Dear Brother,

Can you please tell me which part of the pin numbers to be connected i.e., pin-2, pin-3, pin-5 (to computer or Set-top-Box), pin -3, pin-2, pin-5(to computer or Set-top-Box)

Also give me the exact solid HDS2-3000 SOFTWARE and loader software which you've upgraded. My number is 9884066493. Thanks in Advance.

 

[ramizkhan2006]

hi bro can u send me the universal loader and software of solid hd s2 9210 so i can fix my dth. [email protected]

 

[Er. Dhananjay]

Dear Brother,

Can you please tell me which part of the pin numbers to be connected i.e., pin-2, pin-3, pin-5 (to computer or Set-top-Box), pin -3, pin-2, pin-5(to computer or Set-top-Box)

connecting order is vice-versa
pin2-pin3
pin3-pin2
pin5-pin5

you can use either