My Dish TV SD STB Got Updated.

  • Thread starter Thread starter Maveli
  • Start date Start date
  • Replies Replies: Replies 91
  • Views Views: Views 39,200
iqbal008 said:
nskaran said:
iqbal008 said:
nskaran said:
Vikram said:
Pq And Aq Same On software Upgrade, Effect only user interface or Adding some new services by this
Bro, i feel a little amount of PQ & AQ increased after update. (very little 2 out of 10) what about other friends, who got updated, please share your view here.

dear nskaran bro, i tried to updated my Zenega cd1004is (current version: 4.47 - 1.34). But it fails everytime.
message coming in blank as:
If your frequency 1995
Polarity : V
Symbol rate : 40700
22K switch : on
Diseqswitch : None
PID : 1610
Start :
After i pressed the start it says looking for new software, and then reboots without any software update. any idea.
Note: At present i am using only NSS6
check your pm

Thanks nskaran bro, it worked for me.
happy to know that bro, enjoy.:tup
Now how do you feel about the PQ & AQ after update.
 
nskaran said:
iqbal008 said:
nskaran said:
iqbal008 said:
nskaran said:
Bro, i feel a little amount of PQ & AQ increased after update. (very little 2 out of 10) what about other friends, who got updated, please share your view here.

dear nskaran bro, i tried to updated my Zenega cd1004is (current version: 4.47 - 1.34). But it fails everytime.
message coming in blank as:
If your frequency 1995
Polarity : V
Symbol rate : 40700
22K switch : on
Diseqswitch : None
PID : 1610
Start :
After i pressed the start it says looking for new software, and then reboots without any software update. any idea.
Note: At present i am using only NSS6
check your pm

Thanks nskaran bro, it worked for me.
happy to know that bro, enjoy.:tup
Now how do you feel about the PQ & AQ after update.

PQ & AQ slight change which is negligible except some noticeable changes in display(EPG/Guide). Thanks for your assistance :tup
 
nskaran said:
iqbal008 said:
nskaran said:
Vikram said:
Pq And Aq Same On software Upgrade, Effect only user interface or Adding some new services by this
Bro, i feel a little amount of PQ & AQ increased after update. (very little 2 out of 10) what about other friends, who got updated, please share your view here.

dear nskaran bro, i tried to updated my Zenega cd1004is (current version: 4.47 - 1.34). But it fails everytime.
message coming in blank as:
If your frequency 1995
Polarity : V
Symbol rate : 40700
22K switch : on
Diseqswitch : None
PID : 1610
Start :
After i pressed the start it says looking for new software, and then reboots without any software update. any idea.
Note: At present i am using only NSS6
check your pm

Hi bro... I also need help... Plz help me in this regard...
 
I want to know the current software version, pls let me know. I want to check.
 
iqbal008 said:
nskaran said:
Vikram said:
Pq And Aq Same On software Upgrade, Effect only user interface or Adding some new services by this
Bro, i feel a little amount of PQ & AQ increased after update. (very little 2 out of 10) what about other friends, who got updated, please share your view here.

dear nskaran bro, i tried to updated my Zenega cd1004is (current version: 4.47 - 1.34). But it fails everytime.
message coming in blank as:
If your frequency 1995
Polarity : V
Symbol rate : 40700
22K switch : on
Diseqswitch : None
PID : 1610
Start :
After i pressed the start it says looking for new software, and then reboots without any software update. any idea.
Note: At present i am using only NSS6
Same problem wd me plz plz help me Dear nskaran
 
karthik said:
I want to know the current software version, pls let me know. I want to check.
dear bro Current version is 4.69 - 1.47 (after updated):)
Please check the post:1 in this thread bro.
 
nskaran said:
You are welcome bro iqbal008.


dear nskaran bro, i tried to updated my Zenega cd1004is (current version: 4.47 - 1.34). But it fails.
After i pressed the start it says looking for new software, and then reboots without any software update. any idea.
Note: At present i am using only NSS6

Would be much obliged for any help
 
Skele said:
nskaran said:
You are welcome bro iqbal008.


dear nskaran bro, i tried to updated my Zenega cd1004is (current version: 4.47 - 1.34). But it fails.
After i pressed the start it says looking for new software, and then reboots without any software update. any idea.
Note: At present i am using only NSS6

Would be much obliged for any help
Check your PM
 
Back
Top Bottom