My multi- LNB setup

[cmb_sat]

Thanks for the detailed reply. I will start from scratch and learn how to align the dish properly..
Just started this as a hobby and i love it. Thanks brothers.

 

[vishvish]

Thanks for the detailed reply. I will start from scratch and learn how to align the dish properly..
Just started this as a hobby and i love it. Thanks brothers.

always welcome , yes it is a intresting to track satellites

 

[vishvish]

hello guys , today i modified more to my old own made scalar feed to offset angle lnb, c band , my prime focus is aimed at insat @ 83 E , and added many offset lnb's side ways , see the first post ,

this is tested on asiasat 5 offset to 83 e( 17 degfree difference between two sat's)

well the signal increased dramatically more than earlier

here is the earlier type of modification

then my signal was boosted by some arround 4 db

but now i did some more work on this to add one more ring in modified scalar ,

here is the asiasat 5 , offset to 83 e , without scalar ( even the original scalar dint worked better than this)

so now i did the work arround

see the signal without modified scalar cone

then as said earlier , idid some modification and put that on feed horn

then the signal increased very much by 9 db ,

so now i dont miss any tp's in this type of set up

this means , that in offset angle a conical scalar feed mouth works good


thanks

 

[vishvish]

here is how i made the home made scalar

this is the aluminum bottel of 1 liter

now i marked arround the bottle thinking of cone shape

than i cut with help of exa blade , then it looks like this

then i marked this with feedhorn

then i marked another to mold it to grip the feedhorn

then i cut at first mark, then it looked like this

then i want to bend or molde to second ring , so i did a multiple cuts at the top

after that all parts are bent like this

, after that i cut a plain ring to fix to cone

after that i fixed to cone with help of addsive

all work done and put it up to the feedhorn mouth ,

the result of this work is written above post

thanks

 

[Vikram]

Thanks For Great Experiments & Provide New Tips For increasing Signal, R You Use it on Ku band Dth dish ?

 

[vishvish]

Thanks For Great Experiments & Provide New Tips For increasing Signal, R You Use it on Ku band Dth dish ?

no i did it for prime focus dish , the above


but i did it for ku also very long time ago , this also worked to pick two adjesent sats with good signal ( insat 4b+nss6) indeed two sats get without this also , but it dose the work good even more than earlier having good signals of both sats

here it is same alu bottle

thanks

 

[cmb_sat]

Hello Friends... Just want to know can I view 26.0°E Badr 6 from Colombo Sri lanka? what type of Dish and Lnb would I require?
ps= want to configure it to my open box s9.
Thanks :tup

 

[vishvish]

hello cmb , badr 6 @ 26 E dosent have footprint over srilanka , so i think it is very hard to get , so reports that a guy recived this on 9 feet dish ,

 

[vishvish]

my new DVB WORLD PCI-E 2006 card ( DVB-S2)

specs
------
DVB-S/S2 ,
pci-e 1*1 standerd

tuninig range
-------------
1.5 msps -~ 45 msps for DVB-S/S2

up to 32 msps for 16 APSK ( Only CCM ) ( constant coding and modulation ) no ACM , VCM

up to 28 msps for 32 APSK ( Only CCM ), ( constant coding and modulation ) no ACM , VCM

supports hardware blindscan ( little pathtic)


brought from prgyavan

and DISEQC 1.1 ( 8 Port )

need to check


thanks

 

[Bapun]

excellent jobviswa bhai.from you have buy this card?