E04-4 Smart Card may not be inserted properly/ E06-4 Smart Card Failure (other than Model 1111/1111-U/1111-S/1111-N/SWAP-SDAtom 8003/HDDIGISTB2222/SWAP-HDAtom 8003/HDDIGISTB2233)
Probable Reason
* Smart Card not inserted properly
* Moisture/ dust on Smart Card
#Trouble Shooting Check Points
* Power OFF the Device, slightly pull Smart Card & re-insert properly
* Pull out the Card & Insert Back after Cleaning with Soft & Dry Cloth with
Arrow Direction inside. Insert the card back into thin slot and chip must be opposite to the Big Slot (CAM Slot).(Ensure Product must be switched off during this activity)
* Perform Factory Reset (Menu >> Setup >> Factory Reset >> Press OK Keyor Menu >> Setup >> Installation >> Installation Code >> Factory Reset >> Press OK Key
* If problem not resolved then swap Product
E04-4 Smart Card may not be inserted properly/ E06-4 Smart Card Failure (Only on Model 1111/1111-U/1111-S/1111-N/SWAP-SDAtom 8003/HDDIGISTB2222/SWAP-HDAtom 8003/HDDIGISTB2233)
#Trouble Shooting Check Points
* Perform Factory Reset (Menu >> Setup >> Factory Reset >> Press OK Key)
* If problem not resolved then Swap Product
