Sumitk70
Member
- Joined
- 28 Dec 2017
- Messages
- 487
- Reaction score
- 615
Ok -I have antenna aligned to st2 with universal LNB(single)...y.day tried replacing with monoblock lnb,but i didn't get signal chacked diseqc1 to 4..
Test Procedure - Press Remote Button 15 - 30 Second - one interface will come new setup -
In which Change TP -- SES8 - 11310/V/2900 ( Dish tv Free Channels )
Change Dsque Switch - 2 ...
1 - It will depend on your LNB Postion
2 - Position of LNB 1 & 2.. You can Set Disque 2 for D2H & Disque 1 for ses 8 you can share your Monoblock Image with dish... Like me..
This Option Will Come/ Interface After 15 to 20 seconds Press Menu Button.. your FVT Channel will remove ..Check Channel Number 4000 - in SE8 During Testing - when signal Show
.
Last edited: