pakistani channel on [email protected]

Gurmeet singh said:
What is fine tune?
Bro you receiving watan hd? Please post signal pic of watan hd.

Begin tuning by slowly moving the dish first to the east in one-degree increments(5mm to 10 mm)for a total of three degrees, then in the opposite direction (west) while monitoring the receiver's signal meter. Peak the signal to the highest scale at this point. Ideally, this should be done using an satellite finder ,these allow for a more precise adjustment thanks to their greater signal sensitivity.

Wait for 5 Seconds for results on u r preview screen while Reciever storing the signal on particular Transponder..the moves another 5 mm u r dish as above given instructions..

Lock the antenna azimuth adjustment on the mount once the signal level is maximized.

Perform the same procedure as above using the elevation adjustment, first up and then down for peaking. Lock the satellite dish elevation at the point of maximum signal reception.

Don`t forget fine tune the skew of LNB for optimal results..

Your dish should now be aligned and with good picture in screen. Look the picture quality
in other channels & Transponders also and if necessary repeat the adjustments again...
Best of luck for happy hunting..  :tup
 
Let's see which Indian entertainment channels they add. If they add useful Hindi drama channels along with some English movies channel then this package will be a worth to buy as a DTH :)
 
Hassan Syed said:
Let's see which Indian entertainment channels they add. If they add useful Hindi drama channels along with some English movies channel then this package will be a worth to buy as a DTH :)

But this is meant for Iran and Middle East.
The signals we are getting are just spill overs as they cant lay a barrier on the signal.

How can we buy it as DTH if signals get encrypted ?
 
Newb_Dxer said:
But this is meant for Iran and Middle East.
The signals we are getting are just spill overs as they cant lay a barrier on the signal.

How can we buy it as DTH if signals get encrypted ?
he is from Pakistan bro.
 
Last edited by a moderator:
jkaza said:
Begin tuning by slowly moving the dish first to the east in one-degree increments(5mm to 10 mm)for a total of three degrees, then in the opposite direction (west) while monitoring the receiver's signal meter. Peak the signal to the highest scale at this point. Ideally, this should be done using an satellite finder ,these allow for a more precise adjustment thanks to their greater signal sensitivity.

Wait for 5 Seconds for results on u r preview screen while Reciever storing the signal on particular Transponder..the moves another 5 mm u r dish as above given instructions..

Lock the antenna azimuth adjustment on the mount once the signal level is maximized.

Perform the same procedure as above using the elevation adjustment, first up and then down for peaking. Lock the satellite dish elevation at the point of maximum signal reception.

Don`t forget fine tune the skew of LNB for optimal results..

Your dish should now be aligned and with good picture in screen. Look the picture quality
in other channels & Transponders also and if necessary repeat the adjustments again...
Best of luck for happy hunting..  :tup

How to fine tune a "Monoblock LNB" which has no numberings ?
 
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock