"Your current tv remote to the new airtel remote..."

Discussion in 'Airtel Digital TV' started by RAJ KAREGA KHALSA, Apr 5, 2011.

  1. RAJ KAREGA KHALSA

    RAJ KAREGA KHALSA Registered

    Threads:
    32
    Messages:
    52
    Likes Received:
    6
    Joined:
    Mar 6, 2011
    There are 5 basic functions which your new Airtel remote needs to learn about your TV 1. TV Power code 2. TV Mute code 3. AV code 4. TV VOL code 5. TV VOL code Step 1: Bring Airtel digital TV remote in learning mode. Press and hold `OK Numeric 2 key for 3 seconds. The LED blinks twice to indicate that your Airtel remote is ready to learn. Step 2 : Hold the source remote and Airtel remote in front of each other ( 3cm-6m apart). Step 3: Press & release the key (First on Airtel remote and then on Source remote) which needs to be programmed in Airtel remote. Example: Press and release the TV Power key on both remotes and release. The Airtel remote blinks twice to indicate a successful learning of TV power code`. Step 4: Now Press & release other keys ( on both remotes simultaneously) : Mute , AV, Vol /-. Step 5: Press "OK" on Airtel remote to store the new information about your TV. The LED will blink twice to indicate successful transfer to knowledge from your current TV remote to the new Airtel remote . If the Airtel remote blinks four times, it means the learning failed. Go to step 1 st again
     
  2. Vikram

    Vikram Staff Member Administrator

    Threads:
    892
    Messages:
    5,607
    Likes Received:
    3,909
    Joined:
    Nov 3, 2010
    Location:
    Bikaner, Rajasthan | Gurgaon, Haryana
    :eek:ooh no: Now i am Use my Adtv Remot For my Tv.
    Good Lesson :dance3: