Airtel Transponder

[kafeel_azam]

Hi I just have installed
Airtel HD connection
by my self

now some Ber level Are too low as 20 percent

Please guide how to enter in Transponder which are locked

And fine tune TPS



4

 

[shawl_who]

U mean a signal quality of 20 %

 

[kafeel_azam]

Yes in This
BER 1.72E-04
BER 1.52E-04
Quality is less then 20 percent

4

 

[Mr.AB]

If the picture is not freezing, do not worry much about it. If BER showing 1.72, it looks fine. What about the signal level, is it above 75? if there is no picture freeze, its OK.

 

[kafeel_azam]

Signal strength is 80 percent
Can you please tell me what is this BER
and can we enter to those TPS that are
Locked

4

 

[Mr.AB]

Its the error rate (Bit error rate); if you have good quality/strength it will show a low bit error rate. As said earlier; dont look at those numbers in Airtel receiver. You may need to fine tune the dish, or lnb skew if the picture is freezing.
You may use a local receiver (mpeg4) to measure and increase the signal.