How to use a diseqc switch with 2 Monoblock LNBs

  • Thread starter Thread starter Newb_Dxer
  • Start date Start date
  • Replies Replies: Replies 7
  • Views Views: Views 3,326

Newb_Dxer

Member
Joined
6 Sep 2015
Messages
557
Reaction score
354
Hi,

Does any techie knows about how to use a diseqc switch with 2 Monoblock LNBs from 2 different dishes ?

If so,what are receiver settings for this ?

Thanks

 
Use a 4x1 diseq switch and connect from 1 to 4..this may work
 
Johny said:
Use a 4x1 diseq switch and connect from 1 to 4..this may work

You mean we should connect the 2 Monoblock LNBs in LNB 1 and LNB 4 sockets of disecqc switch ?

By the way I do have 4 x 1 disecqc switch.

 
Last edited by a moderator:
monoblock have 2 lnbs - i haven,t tried so far..showing single cable out in google.. so confusion arises

Sadiq bro is using this ..he will explain..
 
Newb_Dxer said:
Hi,

Does any techie knows about how to use a diseqc switch with 2 Monoblock LNBs from 2 different dishes ?

If so,what are receiver settings for this ?

Thanks

You can use 8 way diseqc which works in 1.1 diseqc function on stb as shown in SS keeping diseqc 1.0 on1&2
f3961158609935b48589a41644db6522.jpg


 
Last edited by a moderator:
Newb_Dxer said:
Hi,

Does any techie knows about how to use a diseqc switch with 2 Monoblock LNBs from 2 different dishes ?

If so,what are receiver settings for this ?

Thanks

hi, if u want to use with 4x1 diseqc switch, u have split the output of monoblock lnb by 2 way powerpass spliter. then connect with 4x1 diseqc switch. if u connect directly with 4x1 diseqc switch, it will not work. if ur stb box having diseqc  1.1 function, u can use 8x1 diseqc switch.(old stb box not working with diseqc 1.1)
 
sskarnold said:
hi, if u want to use with 4x1 diseqc switch, u have split the output of monoblock lnb by 2 way powerpass spliter. then connect with 4x1 diseqc switch. if u connect directly with 4x1 diseqc switch, it will not work. if ur stb box having diseqc  1.1 function, u can use 8x1 diseqc switch.(old stb box not working with diseqc 1.1)

Is 2 way powerpass splitter an ordinary splitter or something else ?

 
Last edited by a moderator:
Back
Top Bottom