use 10 Lnb in dreambox 800

  • Thread starter Vikram
  • Start date
  • Replies: Replies 1
  • Views: Views 6,820

Vikram

Member
Joined
3 Nov 2010
Messages
4,969
Reaction score
3,688
How to install 1-10 LNBs on a Dreambox: (Using 1-10 DiSEqC switch)


Using Dreambox 8000 with 1-10 DiSEqC switch
(this can be modified for 800-8000)

From Setup menu (using remote control)
Select Service searching.
Select Satellite configuration.
(A new page shows)
Select non standard User defined configuration
Select the satellite name

Select LNB 0 and OK
A page opens up
Select Increase voltage
Blue button for next page

Select the following settings
Toneburst = None
DiSEqC mode = 1.1
DiSEqC parameter= none
DiSEqC repeats = none
Uncommitted switch = Input 1

Check 
Sequence repeat, Fast DiSEqC and Swap commands = 

Save (green button)

Choose a new satellite
Repeat the process For LNB1, 2 ...8.
(The only change is in uncommitted switch box)
LNB 0 = Input 1
LNB 1 = Input 2
LNB 2 = Input 3
LNB 3 = Input 4
LNB 4 = Input 5
LNB 5 = Input 6
LNB 6 = Input 7
LNB 7 = Input 8
LNB 8 = Input 9

Save your set up (Green button)
 
well vikram . For this kind of lnb setup .you need uncommited diseqc switch .you can not use normal commited switch
 
Back
Top Bottom
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock