Adtv Remote Setup With Your Tv Remote

  • Thread starter Thread starter Vikram
  • Start date Start date
  • Replies Replies: Replies 4
  • Views Views: Views 33,763

Vikram

Member
Joined
3 Nov 2010
Messages
4,969
Reaction score
3,688
pairing procedure
Universal Remote working As a many types Remote Like Tv,Vcd,Stb,And many more, Many types universal Remote Available in market From Rs.200 To Rs.1500, All Are Multi System Or universal.
Every body know Airtel Introduce Universal Remote First time in india With Dth Connection, Airtel universal Remote Not Fully Universal But Good coz we Add only 5 functions which your new Airtel remote needs to learn about your TV
1. TV Power code
2. TV Mute code
3. AV code
4. TV VOL + code
5. TV VOL – code.
Below Are some steps For working Adtv Remote With tv:

Step 1: Bring Airtel digital TV remote in learning mode. Press and hold ‘’OK + Numeric 2” key for 3 seconds. The LED blinks twice to indicate that your Airtel remote is ready to learn.

Step 2 : Hold the source remote and Airtel remote in front of each other ( 3cm-6m apart).

Step 3: Press & release the key (First on Airtel remote and then on Source remote) which needs to be programmed in Airtel remote.
Example: Press and release the TV Power key on both remotes and release. The Airtel remote blinks twice to indicate a successful learning of ‘TV power code’.

Step 4: Now Press & release other keys ( on both remotes simultaneously) : Mute , AV, Vol +/-.

Step 5: Press "OK" on Airtel remote to store the new information about your TV. The LED will blink twice to indicate successful transfer to knowledge from your current TV remote to the new Airtel remote.

If the Airtel remote blinks four times, it means the learning failed. Go to Step 1 again
 
Its very good tutorial for our member.
Viki .... thank for posting exclusive here in ddf....
 
How to switch between TV and STB control modes?
Adtv universal remote has two separate power buttons for TV and STB. You can swtch on/off TV and stb with these two buttons. More over once you pair the two remotes, you will not have control on STB volume. When you use volume +, - keys, TV volume will increase/decrease. Before pairing, it is advised to set the volume in stb audio settings to 50%. This is in HD DVR STB. I do not know about other stb models.
 
Last edited:
Adtv universal remote has two separate power buttons for TV and STB. You can swtch on/off TV and stb with these two buttons. More over once you pair the two remotes, you will not have control on STB volume. When you use volume +, - keys, TV volume will increase/decrease. Before pairing, it is advised to set the volume in stb audio settings to 50%. This is in HD DVR STB. I do not know about other stb models.
Thank you
 
Back
Top Bottom