Gecen 8X1 DiSEqC Pics

[sunnyk]

ohh thanks for the info dear....

Is it possible to use 22K tone switch with 2 nos. of 4x1 Diseqc switch for the solution to work with Solid receivr?

If yes then Do you have 22K tone switch available with you ?

Pls. suggest.....

 

[Bchander]

We have to buy good latest recievers to get more out off our investments. choose the latest .

 

[pragyavan]

I am giving this info upto my knowledge, if someone knows more please tell me and all the members....

22k switch can be used with two 4 port switches but in one switch you can attach only Horizontal channels and in other switch only vertical channels.

Dual Pol. LNB doesnot work in this setup.....

22K switch is tough to find in India, even we do not sell it, no demand at all these days

ohh thanks for the info dear....

Is it possible to use 22K tone switch with 2 nos. of 4x1 Diseqc switch for the solution to work with Solid receivr?

If yes then Do you have 22K tone switch available with you ?

Pls. suggest.....

 

[Biswajit.HD]

Please give info about the signal insertion loss (in dB) in diseqc switches???

I have a techvision 4X1 diseqc. It has 3 dB insertion loss (as written on it)...
Is this insertion loss same in all diseqcs, or different in some?? :huh

 

[pragyavan]

Please give info about the signal insertion loss (in dB) in diseqc switches???

I have a techvision 4X1 diseqc. It has 3 dB insertion loss (as written on it)...
Is this insertion loss same in all diseqcs, or different in some?? :huh

Normally insertion loss in Diseqc and other switches is 2-3 db only not more then that

 

[Biswajit.HD]

Normally insertion loss in Diseqc and other switches is 2-3 db only not more then that

Does it effect channels with low signal quality?? :huh

 

[sunnyk]

Insertion loss is the loss of signal power resulting from the insertion of a device in a transmission line...

If the power transmitted to the load before insertion is PT and the power received by the load after insertion is PR, then the insertion loss in dB is given b

Insertion loss = 10 log{10} PT / PR

It will not affect your signal quality till 6db insertion loss but if its higher then it will definitely affect performance...

now i have to purchase new receiver from magicdecoder which support Diswqc 1.0,1.1 as i have already bought 8x1 switch !!!

 

[Biswajit.HD]

Thanks for the reply... @sunnyk

 

[Balvinder_Singh]

What is The Guarantee Time For 8x1 Dish Qc Switches

Because I Use Many 4x1 Switches...
But After Some time Half Portion 2 Input Ports Was Dead....
& Other Two Working Well..

And But Is working Of 8x1 Dish Qc Switches In High Temp. + 40 ° C To + 55° C

In North India

Some Users Say That 8x1 Is More Heated & Loss Of Signal In Hot Temp. ?

 

[pragyavan]

What is The Guarantee Time For 8x1 Dish Qc Switches

Because I Use Many 4x1 Switches...
But After Some time Half Portion 2 Input Ports Was Dead....
& Other Two Working Well..

And But Is working Of 8x1 Dish Qc Switches In High Temp. + 40 ° C To + 55° C

In North India

Some Users Say That 8x1 Is More Heated & Loss Of Signal In Hot Temp. ?

No Company provides the warranty on outdoor units like LNBs, DISEQC Switches, Dish Antennas, Multiswitches etc......