Ajanthan_14
Contributor
- Joined
- 9 Jun 2014
- Messages
- 292
- Reaction score
- 282
Step 1
Go to Menu > Setting > User Setting (Password 1234 - by default) > TV setting > Satellite Management (Password > 4th, 6th, 8 & 10 digit of your vc no.)
Step 2
come down to Transponders then press ok.
Step 3
Then press red button[to remove the transponders] don't worry to delete:thumbsup:.
likewise delete all the transponders.
Step 4
Press exit button.
Now if you press channel + / - there will no any channel.
but d2h logo still there, so press Guide button and again press Exit button now logo will not display.
i hope now logo will not display if it still there press active button or any other button.
Step 5
if logo is not there
Go to Menu > Setting > User Setting (Password 1234 - by default) > TV setting > Satellite Management (Password > 4th, 6th, 8 & 10 digit of your vc no.)
Step 6
come down to Transponders then press ok.
press yellow button and add one transponder
Frequency (Mhz) 11164
Polarization Vertical
Symbol Rate 44995
FEC 2/3
Standard / Modulation DVB-S2 / 8PSK
Step 7
Press green button to scan.
[don't worry if you entered 1 transponder it'l automatically add rest]
Step 8
After scan finished save and exit.
now you will not see d2h logo:up:
if is still there press menu button and press exit button.
NOTE
if you press switch off button [standby mode] then on logo will come back so press menu button then press exit button it will get off.
BUT if you power off your stb and on the stb the logo won't go, even you press menu button then exit button. so you need to come from step 1.
so please note this point guys.
Go to Menu > Setting > User Setting (Password 1234 - by default) > TV setting > Satellite Management (Password > 4th, 6th, 8 & 10 digit of your vc no.)
Step 2
come down to Transponders then press ok.
Step 3
Then press red button[to remove the transponders] don't worry to delete:thumbsup:.
likewise delete all the transponders.
Step 4
Press exit button.
Now if you press channel + / - there will no any channel.
but d2h logo still there, so press Guide button and again press Exit button now logo will not display.
i hope now logo will not display if it still there press active button or any other button.
Step 5
if logo is not there
Go to Menu > Setting > User Setting (Password 1234 - by default) > TV setting > Satellite Management (Password > 4th, 6th, 8 & 10 digit of your vc no.)
Step 6
come down to Transponders then press ok.
press yellow button and add one transponder
Frequency (Mhz) 11164
Polarization Vertical
Symbol Rate 44995
FEC 2/3
Standard / Modulation DVB-S2 / 8PSK
Step 7
Press green button to scan.
[don't worry if you entered 1 transponder it'l automatically add rest]
Step 8
After scan finished save and exit.
now you will not see d2h logo:up:
if is still there press menu button and press exit button.
NOTE
if you press switch off button [standby mode] then on logo will come back so press menu button then press exit button it will get off.
BUT if you power off your stb and on the stb the logo won't go, even you press menu button then exit button. so you need to come from step 1.
so please note this point guys.