Biswajit.HD
Contributor
- Joined
- 5 Aug 2011
- Messages
- 37,813
- Reaction score
- 4,633
With lot of Hardwork in a Mechanical Engineering factory in Pune, Maharashtra i have made a Ku Band Multi LNB strip for my 90 cm Ku band MCBS Dish. The strip was prepared from a spare casing material used for carrying High Tension electrical wires in Factories. The strip is cut from the casing, grinded using grinding machine to smoothen its edges and painted in white (Light colour) so that the LNB's dont get heated up due to sun's heat.
Here are the watermarked exclusive pics available only on Dream DTH :
Original LNB Bracket brought from Shop :
Modified LNB Bracket :
Modified LNB Bracket :
Currently i am going for 5 LNB on single Ku Band 90 cm dish for experimental purpose. There are 4 LNB brackets fixed on to the strip, the 5th LNB will be the centre LNB of the LNB holder of the main Dish. I will post photographs of the strip after attaching it with the Dish also.
Thank you. Feedbacks are most welcome.
biswajit.HD
Here are the watermarked exclusive pics available only on Dream DTH :
Original LNB Bracket brought from Shop :
Modified LNB Bracket :
Modified LNB Bracket :
Currently i am going for 5 LNB on single Ku Band 90 cm dish for experimental purpose. There are 4 LNB brackets fixed on to the strip, the 5th LNB will be the centre LNB of the LNB holder of the main Dish. I will post photographs of the strip after attaching it with the Dish also.
Thank you. Feedbacks are most welcome.
biswajit.HD