New TP activated by adtv from ses 9 (No.14th)

[shawl_who]

No.. its 45000 only... when we make NIT Scan the exact Frequency is               coming and its 45000 itself... i think u can try 12700 or 12715...
For example... if i put 11000 in Sun Direct [93.5] i am getting full signals... the correct parameter is 11010 .. that happens few times with our LNB too....sometimes in skew ...

Hmm.. wiLl check changing d freq :tup

 

[M.J.Sadiq]

Dear sadiq yesterday it was my mistake ....But today I didn't see image as it was noy loading in my mobile...

When u quote, if you see IMG tags then please remove them. You might have chosen to not load images.

 

[M.J.Sadiq]

I am not getting this TP in blind scan now.. When I enter the parameters manually, I am getting very less signal..

..

 

[Mr.Bhat]

If u r connecting to Diseqc switch then try connecting directly... if still issue persists then try changing cable from nearest LNB.. if still issues then u have to check either skew or LNB or alighnment...
now getting 12.5 DB and it was 14.5 @ noon ...

 

[M.J.Sadiq]

There was a slight misalignment in my side LNB for ADTV. I adjusted a little and got some improvement in signal and also available in my blind scan. This is a specific problem to me alone due to side LNB setup.

..

 

[M.J.Sadiq]

If u r connecting to Diseqc switch then try connecting directly... if still issue persists then try changing cable from nearest LNB.. if still issues then u have to check either skew or LNB or alighnment...
now getting 12.5 DB and it was 14.5 @ noon ...

I earlier faced signal loss issue due to the use of 4 way connector (not splitter) since I wanted to connect both my set top box and USB card at the same time (though only one can be powered at a time) to reduce cable disconnection and connection every time. Later, I removed it and getting good signal without packet loss in all TPs of ADTV (it was a problem only with ADTV).

My all LNBs are coming through a 10x1 Diseqc 1.1 switch. Not facing packet loss issue anywhere except 11630 V TP of DD Free Dish (it is center monoblock LNB in Dish TV Dish) and this new TP from ADTV (this is the side LNB on same Dish TV Dish).

I will try changing the cable since I already worked a lot on alignment and having best signals on all other TPs (whichever I can get in this side LNB setup).

..

 

[Mr.Bhat]

Thats fine... u know its hard work to get align all those to perfect... once we start facing issues then very difficult...

 

[Vishnu777]

Wow Airtel is becoming superb day by day by new addition of Channels and TPs...:sp

 

[M.J.Sadiq]

Thats fine... u know its hard work to get align all those to perfect... once we start facing issues then very difficult...

I did some skew adjustment and signal is somehow better. Since it is 9dB, I will not get packet loss..

As you can see, now the BER is showing 0 which is frozen at 0 now in all sats for me.

 

[Mr.Bhat]

No BER ! Check PM...