Solid HDS2-6141 ( Help Needed )

[Jatt4u]

Hlo guys i got a solid hds2-6141 stb at very low price
but there is a problem in that box software is installed of any xcruiser stb

That software is not getting signals of any sat.

Plz help me to solve that problem...[emoji53] [emoji53] [emoji53]

 

[Jatt4u]

Guys plz help me

 

[Jatt4u]

I think i create a 1st thread in wrong section no one rply there so now i create there plz help me

 

[jenius-jatt]

I think you must ask to the person from which you have purchased this box ,Why its not working ?
Did it was working before purchased ? Nothing to worry about the software ,You can google it and find right soft..

 

[Jatt4u]

I think you must ask to the person from which you have purchased this box ,Why its not working ?
Did it was working before purchased ? Nothing to worry about the software ,You can google it and find right soft..

He is sayimg that its working in solid firmware but not i this firmware
And he unable to restore it in stock software so he aold it to me
Now am also not found any thing usefull in thia case

 

[Jatt4u]

If u have any info. Then plz send me a link of that firmware plz
I googled but not find any thing usefull....

 

[Rishithulyan]

I think the currently installed Xcruiser firmwire is not compatible for the tuner of 6141.

You can try the Xcruiser firmwire which is compatible for 6141. Here's the download link :

https://www.mediafire.com/?c3eyd1sferd8stc

Please remember that choosing the option to 'upgrade from usb' from the Settings will not work.

You should install only by Uboot method.


Here's the procedure for Uboot Method :

1. download the firmware

2. extract file and rename it Rom.bin

3. put the file in pendrive

4. switch off the box and plug the pendrive in box

5. now switch on recever while pressing ok button on front panel

6. when upgrading start release the ok button

7. firmware will be upgraded

 

[jenius-jatt]

How much this box cost you ? Your pm is disabled so enable it .

 

[Jatt4u]

How much this box cost you ? Your pm is disabled so enable it .

Bai enabled a gssran bai da mag receive hoya mere kol

 

[Jatt4u]

I think the currently installed Xcruiser firmwire is not compatible for the tuner of 6141.

You can try the Xcruiser firmwire which is compatible for 6141. Here's the download link :

https://www.mediafire.com/?c3eyd1sferd8stc

Please remember that choosing the option to 'upgrade from usb' from the Settings will not work.

You should install only by Uboot method.


Here's the procedure for Uboot Method :

1. download the firmware

2. extract file and rename it Rom.bin

3. put the file in pendrive

4. switch off the box and plug the pendrive in box

5. now switch on recever while pressing ok button on front panel

6. when upgrading start release the ok button

7. firmware will be upgraded

Yup bro its working for me
Thanxx for ur help...