Following are the available Terminals for my TV. Please suggest me the best connections between TS HD STB, TV & HT (refer post#16).
This is good if your old model HT has optical in.Leave STB connection as it is. Connect either TV optical digital out or STB optical digital out to HT using optical to analog RCA 5.1 converter.
RAC converter will cost you 6k , rather you can go for low end HT which has at least optical in.This is good if your old model HT has optical in.
The HDMI ARC port is to output the audio return channel and therefore it needs to be directly connected to HT to get the ARC benefit. So the STB is to be connected to another HDMI port on the TV.
In your case this does not matter as you can't connect the HDMI ARC port directly to the HT.
I would use the optical port on the STB and connect it to the HT using an optical to multichannel audio converter.
You can have a look at this. Not sure of the quality though.
Digital Dolby DTS/AC-3 Optical to Analog Audio Gear Sound Decoder 5.1Channel RCA | eBay Mobile
This is surprising d2h STB is working fine with same configuration and TS STB is not working.My Current Connection (But not getting DD 5.1)
a) TV <-> TataSky HD STB HDMI Cable.
b) TV (ARC) <-> HT (5.1) ARC Supported using HDMI Cable.
c) All DD STB side setting done.
I had used same configuration while I was using Videocond2H and I was getting DD5.1 channels.
But I have one HDMI Port and 1 Optical port in HT where Samsung Full HD TV Which have support 1 ARC+3 HDMI ports
First check the following :Dear All,
I am not able to get dolby digital sound from tatasky HD ? Is optical cable is must to get dolby digital sound connect to Home Theater ?
My Current Connection (But not getting DD 5.1)
a) TV <-> TataSky HD STB HDMI Cable.
b) TV (ARC) <-> HT (5.1) ARC Supported using HDMI Cable.
c) All DD STB side setting done.
Please guide me how to get 5.1 DD from tatasky STB ?
Thanks
Getting uniform audio between DD and non DD channels is not feasible. It's at broadcaster level. You need to sacrifice DD to get uniformity by keeping stereo as the audio out in the STB settings.Hello Guys, @ABCDEFGH , @ilikered, @Bapun Raz bro and other experts
I have a same issue out here and would like to continue on this thread itself.
I have the following:
Sony Bravia Android LED TV, model no KDL-W80D
Tata Sky HD
Philips DVD HT Model No: HTD3509/94 (1 HDMI out, and 1 Digital Audio IN, and coaxial in and RCA IN)
I have connected the following way:
TV <-----> TS HD STB via HDMI cable
TV <-----> Philips DVD HT via HDMI ARC ports
Now i have many issues:
1. The DVD HT is HDMI CEC (Easylink) hence when u connect via ARC, there is no audio from TV speakers and Audio comes only from HT. TV remote volume will also cause HT volume to change. I get Dolby 5.1 but the volume is very low as compared to SD channels. So when i change the channel from a HD channel having DD audio to a non DD HD channel or SD channel, then there is sudden increase of sound, i mean to say there is no uniformity
2. Secondly if i connect Digital Audio out (optic) from TS HD STB to HT, the audio is clearer, but again there in no uniformity in HD channels having DD audio and SD channels. SO changing channels i have to lower the volume down everytime i change the channel or else there will be a loud noise
3. Lastly if i connect Digital Audio out from LED TV to HT, here again no uniformity in volume and TV speakers dont work and volume only comes from HT. And in TV Settings, under Sound, there is Digital Audio out, which has 3 options, Auto 1, Auto 2 and PCM. If Audio Mapping in HT settings is tuned off, then i cannot select any option from Digital Audio out in TV settings and only PCM is available.
Pls tell me what should i do and how i can have same audio levels across channels and get 5.1 DD in the best way.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.