Breaking Tata Play to start utilizing GSAT-24 satellite shortly

  • Thread starter Thread starter sudheep
  • Start date Start date
  • Replies Replies: Replies 779
  • Views Views: Views 127,848
The super lnb will not be completely replaced. It will take time to complete. This is my calculation.It was learned that there are still about 500 super lnbs to be changed in Kochi alone. Its customers are mostly busy people, so this can be changed only in their time.🙏

Sarfaraz bro..Tata guys,in kerala asserted that they don't know anything. Even a little knowledge.
 
What was that joint function by Tata and NSIL on Tuesday for? Did they make announcement without confirmation on technical issues?
 
Update

Don't Expect Channels Shifting To GSat-24 Anytime Very Sooner!

Technically Tata Play Is Not Completely Ready For Channels Shifting.

Guys,

Some Misunderstanding Happening With Few Members,

Technically Not Roady Means, It's Not Issue With Satellite, GSat-24 Fully Operational And Ready To Shoot,

But That's Only Not Enough, Have Some Patience,,,,
 
Update - Tata Play Launching New Carriage Fees(FTA) Channels From 21st August .

Migration Will be Starting in Phase wise from Tonight 01:00 am onwards .


Aug - 7(Tonight),8,9,10,11 & Next Week 15,16,17&18 it'll be completed.
Bro according to your statement this going to happen until 21st August 2023?
 
Important Update

Posting As Received From Tata Play Team,

-------------------------------------------------------------------------------

Troubleshooting Steps if after Super 1.0 to Super 2.0 Migration No Signal Issue is observed


1. Check signal strength / MER on signal test screen for Ch 100. If not proper, Dish needs to be peaked / LNB Skew angle needs to be adjusted


2. Check LNB settings on STB. Should be Super LNB


3. Reboot box and check Ch 2250. If available, implies box has migrated.


4. If ch 2250 is not available, check STB Software / do forced Download. Also try sending Bmail and Master Reset
 
Important Update

Posting As Received From Tata Play Team,

-------------------------------------------------------------------------------

Troubleshooting Steps if after Super 1.0 to Super 2.0 Migration No Signal Issue is observed


1. Check signal strength / MER on signal test screen for Ch 100. If not proper, Dish needs to be peaked / LNB Skew angle needs to be adjusted


2. Check LNB settings on STB. Should be Super LNB


3. Reboot box and check Ch 2250. If available, implies box has migrated.


4. If ch 2250 is not available, check STB Software / do forced Download. Also try sending Bmail and Master Reset
So this is reason some times my binge stb not showing signals I am restarting it 😔
 
Back
Top Bottom