Discussion Tata Sky Satellite Migration to GSAT 31 (2019) - Discussions, News and Updates - Migration Completed.

Don't know why Rushil bro is not understanding . Already Ts using 2 H Tps of Gsat -10 since 2016 Tp 10850 H & 10890 from which 1 is being used for Super LNB users n other one is for Ts Hotels connection use. So its possible .

No. Both are used by super lnb

10850 is the entry point
10890 is the download location
 
No. Both are used by super lnb

10850 is the entry point
10890 is the download location
In Hotel Connection Home Tp is 10850 H . You can check bro when you to any Hotels . I've seen it.
 
It reduces the life span of the satellite if both V and H tps are activated. But it’s not an impossible thing
 
It reduces the life span of the satellite if both V and H tps are activated. But it’s not an impossible thing
Yes its Life will be less as more fuel will be used . But Ts now have 3 Sats, 1 more to launch next year so Ts can have more than 30+ Tps till year 2035 after Insat expires next year.
 
Getting 0 Signal Quality in Living Foods HD
Not even watchable. Picture Freezing. Sound Distorting.

IMG-20190926-231207.png


Getting 40 Signal Quality on other channels.
 
Bro but how it is possible to double the capacity ?? Doubling 12 or 18 transponders !!

There was a theory revolving of "Frequency Reuse" when TS started testing V TPS during 2015 and later it was found that it's of new sat GSAT 10.
Well AFAI remember at that time it was tested V Polarity in Insat only....i think Insat was not had sufficiant power capacity to sustain the additional load...so they has to wait untill Gsat gets ready...perhaps @dino29 is aware of it...
 
Well AFAI remember at that time it was tested V Polarity in Insat only....i think Insat was not had sufficiant power capacity to sustain the additional load...so they has to wait untill Gsat gets ready...perhaps @dino29 is aware of it...
Then what is the meaning of payload??
 
I know what has happened. I did some analysis on this. The satellite is GSAT 31 itself and not GSAT 10 H.

Super LNB have a different home TP/Entry point as compared to normal LNB. It's set to 10850 H on GSAT 10. GSAT 10 has no H TPs for that matter. But I guess they are using a blank frequency as a link to Super LNB as there's no data on that frequency.

Yesterday and today I have seen the INSAT TP signal go down while GSAT TP signals remain normal. Now let us take a scenario.

As someone said that GSAT 10 H polarization has been enabled and it's not GSAT 31 then why are many getting low signals on H TPs??? Remember SUPER LNB Entry point also is on H TP but it's 80% Signal quality unlike the other H TP that have very low signals. IF at all GSAT 10 H polarization has been active then all would have got good signals

Now the orbital position of GSAT 31 is 82.9x unlike INSAT 4A and GSAT 10 which is exactly 83.0, it could be aligned to proper 83.0 in coming days. So I feel the signals of H TP that we all are receiving are from GSAT 31, why ?

1. Some users are getting very high signals (were getting good signals for INSAT)
2. Some users are getting very low quality signal (were getting good signals for INSAT)
3. Signals get stronger at night and weaker at day (Dont know if its region based)

So from the above we can see that the weak signal can either be due to dish alignment, lnb skew issue or satellite orbital position or some background testing activities.

If the H polarization signals were from GSAT 10 then all would have got high signals. (Like Super LNB Frequency)
So we can come to a conclusion that the H TP signal could be from GSAT 31.
 
Last edited:
Back
Top Bottom