Issue with HD channels with Dolby Digital/+

[PRK]

I have a problem with all HD channels with Dolby audio. Tata Sky remote is useless in these channels to change volume. I have to use my TV remote to change volume. This is a hassle because then when I change channels again I have to set volume. Does any one know solution for this

 

[jdrocks]

I have a problem with all HD channels with Dolby audio. Tata Sky remote is useless in these channels to change volume. I have to use my TV remote to change volume. This is a hassle because then when I change channels again I have to set volume. Does any one know solution for this

If you're just using TV audio, you don't need DD. So set your STB HDMI audio output to PCM in the settings. Then you can control volume with TS remote.

 

[PRK]

If you're just using TV audio, you don't need DD. So set your STB HDMI audio output to PCM in the settings. Then you can control volume with TS remote.

are you sure quality of sound will not change, my tv speakers give very good sound in this mode

 

[jdrocks]

are you sure quality of sound will not change, my tv speakers give very good sound in this mode

Try it.

 

[kamalaravi]

Dolby digital plus will work only for those who connect home theatre systems thru optical out from Tata sky stb.am I right?

 

[Rushabh]

It is because your tv doesn't support Dolby sound...set pcm in sound setting

 

[PRK]

Try it.

I tried it, my TV gives awesome sound on Dolby digital+ with effects. But when I change to PCM it is very dull

 

[Pam]

I tried it, my TV gives awesome sound on Dolby digital+ with effects. But when I change to PCM it is very dull

Same problem bro.. Sacrificing with pcm, you don't have universal remote? If yes then its easy to use both tv and stb with single remote..

 

[jdrocks]

I tried it, my TV gives awesome sound on Dolby digital+ with effects. But when I change to PCM it is very dull

OK, second option is if you have TS universal remote, programme the remote to control TV volume. Then you can set the STB at DD+ and use TS remote in univ mode to control TV volume.

 

[jdrocks]

Dolby digital plus will work only for those who connect home theatre systems thru optical out from Tata sky stb.am I right?

No. Optical connection supports only upto DD 5.1 audio. For DD+, you need to use HDMI connection.