My tatasky was having signal issues in some channels for last few days. As per the directions obtained from the technician, I have turned the LNB so that there was no signal problem and everything works perfect.
But yesterday, when I turned on The STB, "no signal screen" was showing. I was unable to watch even a single channel. I have performed a "Master Reset" and STB was restarted. Selected language as English, Select LNB parameters as it is and select Satellite INSAT 4A-14 then I get a "Signal Lock Screen". Signal Strength=100% Signal Quality=80%. No further options are available.
Is there anyway I can sort out this problem myself and view channels.
Thanks in advance.
Problem solved temporarily
My problem got solved by readjusting the LNB. Adjust/Turn the LNB till "Tata Sky" text is shown under the "lock symbol" in screen shot I have posted. It may be not near the current LNB setting. Now adjust the LNB such that signal quality is maximum.
My problem got solved temporarily. But in regional channels "Signal Quality" is 10% and for hindi/english entertainment channels is 50-60%. But I dont know whether I was able to receive any signals from vertical polarity as I changed the LNB position. After all something is better than nothing.
Already reported to Tatasky and expecting a technician visit. Everyone in tatasky is facing this issue , so I think immediate help is not available. Now just able to watch channels after two days of "No Signal".
Is there anyway I can improve "Signal Quality" as someone say higher signal quality is good
Finally, I would like to thank all of you for the help and support you provided.
Update:
Finally technician from tatasky came without satellite finder meter after one and a half months since "No signal" issue is reported. He suggested me a dish upgrade which cost around 700-800 to sort all the problems because I was using older dish which is smaller.
Anyone using tatasky old dish having this problem. How much it actually cost for dish upgrade?
I think its time to get rid of this crap. Now waiting for the semi annual pack to expire and remaining balances to be over.
But yesterday, when I turned on The STB, "no signal screen" was showing. I was unable to watch even a single channel. I have performed a "Master Reset" and STB was restarted. Selected language as English, Select LNB parameters as it is and select Satellite INSAT 4A-14 then I get a "Signal Lock Screen". Signal Strength=100% Signal Quality=80%. No further options are available.
Is there anyway I can sort out this problem myself and view channels.
Thanks in advance.
Problem solved temporarily
My problem got solved by readjusting the LNB. Adjust/Turn the LNB till "Tata Sky" text is shown under the "lock symbol" in screen shot I have posted. It may be not near the current LNB setting. Now adjust the LNB such that signal quality is maximum.
My problem got solved temporarily. But in regional channels "Signal Quality" is 10% and for hindi/english entertainment channels is 50-60%. But I dont know whether I was able to receive any signals from vertical polarity as I changed the LNB position. After all something is better than nothing.
Already reported to Tatasky and expecting a technician visit. Everyone in tatasky is facing this issue , so I think immediate help is not available. Now just able to watch channels after two days of "No Signal".
Is there anyway I can improve "Signal Quality" as someone say higher signal quality is good
Finally, I would like to thank all of you for the help and support you provided.
Update:
Finally technician from tatasky came without satellite finder meter after one and a half months since "No signal" issue is reported. He suggested me a dish upgrade which cost around 700-800 to sort all the problems because I was using older dish which is smaller.
Anyone using tatasky old dish having this problem. How much it actually cost for dish upgrade?
I think its time to get rid of this crap. Now waiting for the semi annual pack to expire and remaining balances to be over.